1911 grips that will fit Full size or Commander pistols. Grips are of Caribbean Rosewood, also known as Chechen wood. They have nice caramel colors, nice grain and some very nice shimmer to them. They do not cover the safety tube on the left and are not cut for “Wing” style ambi safeties. These will add subtle class to your carry gun.

These are grips for a Star Firestar M45 .45 caliber pistol. They are made of Black Walnut and are hand made from start to finish. They have a satin finish. I have made them with slightly generous tolerances to try and make sure that they will fit your pistol as Spanish pistols are famous for ever so small differences in things like screw hole locations, magazine release size etc. They have been tested on my personal Firestar for function with the magazine in place. They are not shaped the same as stock grips, I have made them to better fill your hand and make it easier to hit the magazine release.

2 set of grips for a Star PD. One set is Curly Birdseye Maple, the other is Zebra wood. Both are hand made and shaped to fit the hand better than stock

1911 grips of Gaboon Ebony with Buffalo Nickel’s inlaid. Flat finish. private sale for Jessie.

Spalted Silver Maple grips for a Star Firestar M43. The wood comes from a friends farm in Tennessee. The brown spalting is rather unusual for Maple wood, normally the spalting is black. These have been shaped to fit the hand to make holding it much more comfortable. Private sale for John.

Grips for a Ruger Wranger, will also I believe fit a Super Wrangler. Grips are of Zircote wood, a South American hardwood that is very unique. These will make your Wrangler like no other.

Grips for a Ruger Blackhawk of Indian Laurel wood. Your pistol grip frame mut say “XRN-3RED under the left grip (see picture) for these to fit.

Grips for a Ruger New Blackhawk. The grips are of Indian Laurel and have US Barber style dime inlaid. Your pistol must say “XRN-3RED” under the grips on the frame (see photo) for these to fit.

Grips for a Full size or Commander size 1911. These are made of Paldao wood and a cut about .05” thicker at the bottom than the top for you guys with long fingers, like me, to help fill in the gap around the bottom of the pistol grip. Paldao is a hardwood that comes from Southeast Asia and has a nice luster.

Clean Black Walnut grips with more grain than the original issue grips would have had but still seriously non pretentious. These grips were hand cut from stock, drilled, shaped sanded and finished by hand. There is 5 coats of finish on these grips, each one inspected for the correct look and feel. They are all test fit against and actual Colt 1917 military frame. These are not made to exactly duplicate the original grips as I do not think they were the best feeling so I have made minor changes in order to enhance the ergonomics.

Curly Maple grips for the Colt 1909 / 1917 New Service military frame revolver. These grips were hand cut from stock, drilled, shaped sanded and finished by hand. There is 5 coats of finish on these grips, each one inspected for the correct look and feel. They are all test fit against and actual Colt 1917 military frame. These are not made to exactly duplicate the original grips as I do not think they were the best feeling so I have made minor changes in order to enhance the ergonomics. These grips will make your New Service revolver stand out from the rest as the treasure you treat it as.

Honduran Rosewood grips for the Colt 1909 / 1917 New Service military frame revolver. These grips were hand cut from stock, drilled, shaped sanded and finished by hand. There is 5 coats of finish on these grips, each one inspected for the correct look and feel. They are all test fit against and actual Colt 1917 military frame. These are not made to exactly duplicate the original grips as I do not think they were the best feeling so I have made minor changes in order to enhance the ergonomics. These grips will make your New Service revolver stand out from the rest as the treasure you treat it as. These may very well be the only set of Honduran Rosewood grips for a Colt New Service revolver in the entire world.

Private sale for Michael- grips for the Star M45 pistol, hand made from cutting the blanks to shaping and hand sanding. 5 coats of hand rubbed finish to bring out the deep shimmer in the wood. Grips are checked for fit and function on my own pistol.

Tasmanian Blackwood grips for the Colt 1909 / 1917 New Service military frame revolver. These grips have a wide variety of colors in the wood, from browns and orange to reds, dark browns and black. These grips were hand cut from stock, drilled, shaped sanded and finished by hand. There is 5 coats of finish on these grips, each one inspected for the correct look and feel. They are all test fit against and actual Colt 1917 military frame. These are not made to exactly duplicate the original grips as I do not think they were the best feeling so I have made minor changes in order to enhance the ergonomics. These grips will make your New Service revolver stand out from the rest as the treasure you treat it as. These most likely are the only set of Tasmanian Blackwood grips for a Colt New Service revolver in the entire world.

3.75” Ladder Damascus hunter with 1/8” thick upturned svelte blade. Handle is Asian Satinwood which has some very nice curl and figure which must be seen in person to appreciate. The handle is shaped to fit very nicely in most hands. Comes with a leather sheath.

Grips for the Colt 1917 Military frame revolver. These are hand made to fit that specific pistol. The wood is Macassar Ebony with a satin finish. The Colt medallions are new /old stock. Fit is checked against an actual 1917 frame to ensure the best possible fit. Private sale for Tim.

4” blade San Mai ladder damascus drop point hunter. 1080 and 15n20 steel. Hand cut jimping on the spine. Beautiful Tiger Maple handle with bronze handle pins and red”K”mosiac. Brown leather sheath. This knife is light for it’s size and would make a great Fathers Day or Graduation gift.

3” San Mai Damacus clip point hunter with beautiful Koa Wood handle. The pins are copper with a black “K” mosiac pin. Comes with a brown leather sheath. The handle is made a tad thicker for a better fit for larger hands. This Koa wood is leftover from the cribbage board I made my wife and is quite nice. The blade is quite striking in the layer patterns.

5” Damscus Ulu knife, the Inuit utility blade. This blade can do it all from skinning a whale or seal to dressing out a caribou or elk to chopping vegtables in the kitchen. It is all depending on how you hold it and use your wrist. Built one for my wife and she uses it all the time for vegi’s in the kitchen. This one has a Baked Maple handle with fantastic shimmer and has a bucking cowboy pin and “K” pin. This would make a great gift to the cook in your life. Comes with a black leather sheath for the times it is needed in camp.

3 1/2” Damascus clip point knife. This knife fits the hand very well, is slim and light and easy to wield. Would make a good every day knife. I like this blade very much and will continue to make them as I have quite a few in stock. Claro Walnut handle, nickel silver pins and a "K” mosiac pin. Black leather sheath.

3 1/2” Damascus clip point knife. This knife fits the hand very well, is slim and light and easy to wield. Would make a good every day knife. I like this blade very much and will continue to make them as I have quite a few in stock. Black Walnut handle, copper pins and a "K” mosiac pin. Black leather sheath.

3 1/2” Damascus clip point knife. This knife fits the hand very well, is slim and light and easy to wield. Would make a good every day knife. I like this blade very much and will continue to make them as I have quite a few in stock. Canary wood handle, copper pins and a "K” mosiac pin. Brown leather sheath.

3 1/2” 1095 High Carbon steel hunter with hand cut jimping on the spine. 2 copper handle pins and a black “K” mosiac pin. The handle wood is Black Walnut from a personal friends farm in Tennessee. There was a void in the wood that was not visible until after it was secured to the tang but it added to the character plus the wood was too pretty to stop, so I filled it in with epoxy and kept it. Comes with a black leather sheath.

This is a 4” Raindrop Damascus hunter knife. The steel types are 15n20 and 1080. There is hand cut jimping on the spine just in front of the handle. The handle is book matched Curly Black Walnut with not only eye catching shimmer but curl. The handle pins are bronze with a black “K” mosiac. This is a seriously eye catching knife. This knife is also very light at only 5.5oz. This would make a great gift.

Triple track Cribbage board made of Beli wood, a tropical hardwood from West Africa that is very uncommon here in the US as it is not commonly marketed and is difficult to obtain. This board comes with pins for 3 players, a scorekeeper pin and a spare, 12 total and a small black velvet bag for storage.

This is a Bearded Damascus Short axe. The shaft / handle is 22” long, is made from Baked Birdseye Maple with a brass lanyard hole and a red “K” mosiac pin. The head is Damascus from 15n20 and 1080 steels and is hand forged and is 57+ HRC file tested. The handle/ head wedge is made from Black Walnut. While this short axe is decorative in looks it is capable of full on axe function. The blade is sharp and is solidly attached to the shaft. The single hand balance point is just down from the “K” pin and the 2 handed grip is at the bottom of the grip at the flare. The sheath was custom made for this head. Make your dining hall look like a Viking lords with this short axe!

3 1/2” Damascus clip point knife. This knife fits the hand very well, is slim and light and easy to wield. Would make a good every day knife. I like this blade very much and will continue to make them as I have quite a few in stock. Golden Myrtle handle, brass pins and a red "K” mosiac pin. Black leather sheath.

Triple track Cribbage board made of Beli wood, a tropical hardwood from West Africa that is very uncommon in the US as it is not commonly marketed and is difficult to obtain. Beli wood has depth and flash to the grain that i quite attractive. This board does not have a “K” mosiac pin set in the face and comes with pins for 3 players, a scorekeeper pin and a spare, 12 total and a small black velvet bag for storage.

3” Stainless steel hunter with Zircote wood handle, brown leather sheath. This knife style handles extremely well, feels great in the hand and balances just behind the finger guard. This is my favorite hunting blade and I think you will find it so too.

3” San Mai Damascus hunter with Canary Wood handle, brown leather sheath. This knife is very lightweight, handles extremely well, feels great in the hand and balances just behind the finger guard. This is my favorite hunting blade style and I think you will find it so too.